Events
Events
Events
Events
Events
Events
Events
Events
Events
MY FS FLIGHTS
Flight Score
Monitor your speed
Below 10,000 ft you are typically limited to 250 kt indicated (a US rule that much of the world mirrors in some form, though not universally). This forces a deceleration around 10,000 ft whether the profile wants one or not, so plan for it rather than discovering it.
Start to finish · 18 stages, 16 scored
Events
Events
Events
Events
Events
Events
Events
Events
Events
The threshold, the flare and the hold-off. The approach that led to it is the stabilisation gates below.
One stabilised approach gate: five checks where the approach path is 500 ft above the runway. The 1,000 ft gate was not assessed, because the approach did not join final that far out.
Side view — the last 1,524 m of the approach.
Plan view — the first 1,524 m of the 2,130 m runway, to the same scale as the side view.
The 354 m touchdown sits inside the full-score zone. The arrival was smooth.
The rest of the report
The flight in the Airbus A320 from Seve Ballesteros-Santander Airport to Bilbao Airport was smooth and uneventful. Taxiing from the parking to the runway took 9 minutes and covered 1 nm. The departure roll from runway 11 at LEXJ was successful, with a takeoff distance of 1,402 m, reaching liftoff speed at 149 kn. The local weather at the time of departure was calm, with a temperature of 16 °C and no significant wind conditions.
During the enroute climb, the aircraft ascended from 1,008 ft asl to 3,456 ft asl in 1 minute, covering 3 nm. The climb was efficient and steady, with no reported issues. The enroute level cruise lasted for 7 minutes, covering 22 nm. The descent phase started near Castro-Urdiales, with a descent from 3,497 ft asl to 1,453 ft asl in 3 minutes, covering 9 nm.
The final approach to runway 12 at LEBB Bilbao Airport was from the west, with the aircraft maintaining a heading of 117.0 ° at 4 nm and 1,322 ft agl. The landing on runway 12 was successful, slightly exceeding the threshold speed at 144 kn. The touchdown point was slightly beyond the touchdown zone, with a touchdown speed of 143 kn and firm touchdown rate at -384 ft/m.
The total landing distance was 1,111 m, covering 52% of the runway. The runway rollout alignment was perfect, leading to a smooth taxiing to the parking area in 8 minutes. The total flight distance was 43 nm, with a flight time of 27 minutes and fuel consumption of 883 kg. Overall, the flight in the Airbus A320 was completed safely and efficiently.
Overall, this aircraft landing score of 97.0% indicates a highly proficient landing with only minor areas for improvement. The Approach Phase of the landing was particularly impressive, with excellent glideslope alignment and a slightly above target threshold speed of 144 kn. This demonstrates skilled piloting and a solid understanding of the aircraft's performance characteristics.
Moving on to the Landing Phase, the report highlights a good threshold height and a very good landing flare. These factors contributed to a smooth transition from approach to touchdown and suggest a high level of precision and control during this critical phase of the landing.
While the Touchdown Phase did show some areas for improvement, such as a firm touchdown rate of -384 ft/m and a slightly fast touchdown speed of 143 kn, these minor issues did not detract significantly from the overall quality of the landing. The touchdown point being 137 m beyond the touchdown zone is also worth noting, as it indicates the need for increased attention to touchdown point accuracy in future landings.
Despite these minor points, the report notes that the runway touchdown alignment was very good, further underscoring the pilot's skill and proficiency in executing a successful landing. With continued practice and attention to detail, this pilot has the potential to achieve even higher landing scores in the future. Keep up the great work and continue to strive for excellence in all phases of aircraft operations. Great job!
Scroll or drag the slider to zoom · double-click to reset · hover for values