Events
Events
Events
Events
Events
Events
MY FS FLIGHTS
Flight Score
Avoid steep turns at low altitude
Below a thousand feet the aeroplane is slow, heavy and close to the ground. A steep turn loses lift, raises the stall speed and flattens the climb just when the gradient matters most. A normal turn on course is a rate one — fifteen degrees or so, twenty-five at the outside, this penalty is to acknowledge when a turn has stopped being a turn and become a manoeuvre.
Read more in Improve Your Take-OffsStart to finish · 18 stages, 17 scored
Events
Events
Events
Events
Events
Events
Two stabilised approach gates, each with six checks at 1,000 ft and 500 ft above the runway.
Side view — the last 789 m of the approach.
Plan view — the full 789 m runway, to the same scale as the side view.
The 68 m touchdown sits inside the full-score zone. The arrival was smooth.
The rest of the report
Great job on achieving a landing score of 98.8%! Your approach phase may have had a descent path slightly below the glideslope limit, but overall it was a minor deviation that did not significantly impact your score. Your landing phase, on the other hand, was nearly flawless. Your threshold height was spot on, and your landing flare was executed perfectly.
In the touchdown phase, your touchdown rate was smooth and although your speed was slightly above the target, it was well within acceptable limits. Additionally, your touchdown distance inside the touchdown zone shows excellent precision and control. The fact that your runway touchdown position was only 2.1 meters from the centerline is a testament to your exceptional piloting skills.
Finally, during the rollout phase, your runway alignment was slightly off at 4.6 meters from the centerline. While this is an area for improvement, it does not overshadow the overall excellence of your landing.
Keep up the great work and continue to strive for perfection in all phases of aircraft landing. Your dedication to improvement will undoubtedly lead to even higher scores in the future. Well done!
Scroll or drag the slider to zoom · double-click to reset · hover for values