Events
Events
Events
Events
Events
Events
Events
Events
Events
Events
Events
MY FS FLIGHTS
Flight Score
Hold the approach angle
Preparing for a stable approach will give you time to decide on whether to attempt the landing or going around. Too much altitude with a high sink rate will result in carrying too much speed onto the runway. Configuring flaps and the gear late also won't help the speed decay.
Read more in The Stabilised ApproachStart to finish · 22 stages, 21 scored
Events
Events
Events
Events
Events
Events
Events
Events
Events
Events
Events
The threshold, the flare and the hold-off. The approach that led to it is the stabilisation gates below.
One stabilised approach gate: five checks where the approach path is 500 ft above the runway. The 1,000 ft gate was not assessed, because the approach did not join final that far out.
Side view — the last 1,524 m of the approach.
Plan view — the first 1,524 m of the 1,910 m runway, to the same scale as the side view.
The 360 m touchdown sits inside the full-score zone. The arrival was smooth.
The rest of the report
Overall, you have achieved an aircraft landing score of 87.3%, which is a commendable result. Let's take a closer look at each phase of the landing process to see where improvements can be made.
In the Approach Phase, the descent path was above the glideslope limit, indicating that the aircraft may have descended too quickly or too steeply. This can be rectified by closely monitoring the aircraft's descent rate and adjusting it accordingly to stay within the designated glideslope limit.
Moving on to the Landing Phase, the threshold height was below the target, which suggests that the aircraft may have descended too low before reaching the runway threshold. However, the landing flare was performed very well, indicating a smooth and controlled touchdown. Focus on maintaining the correct threshold height to ensure a safe and precise landing.
In the Touchdown Phase, the touchdown rate was good, but the speed was slightly above the target. It is important to closely monitor the aircraft's speed during the landing phase to ensure a safe touchdown. Additionally, the touchdown distance inside the touchdown zone is a positive point, but the runway touchdown position being 11.3 m from the centerline indicates a need for improved lateral alignment during touchdown.
Lastly, in the Rollout Phase, the runway alignment was 10.8 m from the centerline. Paying attention to maintaining proper alignment during rollout will help improve overall landing precision.
Overall, your performance in the landing process is solid, with room for improvement in certain areas. By focusing on maintaining correct descent paths, threshold heights, touchdown speeds, and lateral alignment, you can further enhance your landing skills. Keep practicing and striving for precision in every aspect of the landing phase. Great job on achieving an aircraft landing score of 87.3%, and keep up the good work!
Scroll or drag the slider to zoom · double-click to reset · hover for values