Events
Events
Events
Events
Events
Events
Events
Events
Events
Events
MY FS FLIGHTS
Flight Score
Work on the flare
Arrive slow and the sink rate at the threshold is already above schedule, the flare is short because there is no energy to extend it, and the touchdown is hard in a way that feels exactly like a late flare. Diagnosing a slow arrival as a late flare is the catastrophic misread: you respond by flaring earlier, which bleeds more speed, which makes the next one worse. The tiebreaker is threshold speed against VRef, not feel. Never diagnose a flare without it.
Read more in Flare TimingStart to finish · 17 stages, 16 scored
Events
Events
Events
Events
Events
Events
Events
Events
Events
Events
The threshold, the flare and the hold-off. The approach that led to it is the stabilisation gates below.
One stabilised approach gate: five checks where the approach path is 500 ft above the runway. The 1,000 ft gate was not assessed, because the approach did not join final that far out.
Side view — the last 5,000 ft of the approach.
Plan view — the first 5,000 ft of the 5,298 ft runway, to the same scale as the side view.
The 790 ft touchdown sits inside the full-score zone. The arrival was smooth.
The rest of the report
Overall, you showed some strong skills during this landing, such as good approach speed, excellent touchdown rate, and a very good touchdown distance. However, there were some areas that could use improvement, such as unstable glideslope alignment, low height at the threshold, and a poor landing flare.
In future landings, focus on maintaining a stable glideslope alignment and ensuring you are at the appropriate height at the threshold. Work on your landing flare to achieve a smoother touchdown. Keep up the good work with your approach speed, touchdown rate, speed, and runway alignment. Consistent practice and attention to these areas will help you continue to improve your landings. Keep pushing yourself and striving for progress with each landing. You've got this!
Scroll or drag the slider to zoom · double-click to reset · hover for values