Events
Events
Events
Events
Events
Events
Events
Events
MY FS FLIGHTS
Flight Score
Landing lights
Before entering the runway, make sure your landing lights are on and the taxi lights switched off.
Start to finish · 22 stages, 21 scored
Events
Events
Events
Events
Events
Events
Events
Events
The threshold, the flare and the hold-off. The approach that led to it is the stabilisation gates below.
One stabilised approach gate: five checks where the approach path is 500 ft above the runway. The 1,000 ft gate was not assessed, because the approach did not join final that far out.
Side view — the last 1,524 m of the approach.
Plan view — the first 1,524 m of the 1,807 m runway, to the same scale as the side view.
The 459 m touchdown sits inside the full-score zone. The arrival was smooth.
The rest of the report
Congratulations on achieving a landing score of 93.5%! Overall, your approach phase was impressive with excellent glideslope alignment, although your speed was just slightly below target. In the landing phase, you had a slight issue with the threshold height being above target, but your landing flare was perfect. However, there was a small error in your landing heading.
Moving on to the touchdown phase, your touchdown rate was fair and your speed was right on target. It's great to see that you managed to land within the touchdown zone, with a runway touchdown position of 9.5 meters from the centerline, despite the presence of a 13 knot crosswind. Well done on handling that challenge effectively!
During the rollout phase, your runway alignment was slightly off at 12.5 meters from the centerline. This could be something to focus on for future landings, but overall, your performance was strong.
Keep up the great work and continue to fine-tune your skills to further improve your landings. Your attention to detail and ability to adapt to different conditions are commendable. With a little more practice and focus on minor adjustments, you'll soon be achieving even higher landing scores. Well done on a successful landing!
Scroll or drag the slider to zoom · double-click to reset · hover for values