Events
Events
Events
Events
Events
Events
Events
Events
MY FS FLIGHTS
Flight Score
Configure earlier
Preparing for a stable approach will give you time to decide on whether to attempt the landing or going around. Too much altitude with a high sink rate will result in carrying too much speed onto the runway. Configuring flaps and the gear late also won't help the speed decay.
Read more in The Stabilised ApproachStart to finish · 26 stages, 24 scored
Events
Events
Events
Events
Events
Events
Events
Events
Two stabilised approach gates, each with five checks, where the approach path is 1,000 ft and 500 ft above the runway.
At the 1,000 ft gate: sink rate above what the glideslope needed.
The approach, gate by gate
Side view — the last 2,762 m of the approach.
Plan view — the first 2,762 m of the 3,975 m runway, to the same scale as the side view.
Touched down 692 m past the threshold — beyond the full-score zone. The arrival was smooth.
The rest of the report
Departure from Jorge Chavez International Airport in Lima, Peru, began with a taxiing phase that lasted 16 minutes and covered a distance of 3 nautical miles. The Boeing 737-900 then rolled onto runway 16L, where it achieved a takeoff distance of 2,430 meters, utilizing 84% of the available runway. The aircraft lifted off at a speed of 173 knots, with a local temperature of 24°C and a wind of 10 knots from 279°.
As the aircraft climbed to cruising altitude, it passed overhead Carmen De La Legua Reynoso, Callao, Peru, and continued to ascend to 32,232 feet above sea level. The enroute climb phase was followed by a series of level cruises, with the aircraft maintaining altitudes of 32,247 feet, 32,820 feet, 33,736 feet, and 35,099 feet, respectively. The longest level cruise phase lasted 113 minutes, covering a distance of 868 nautical miles. The aircraft then began a series of descents, with the final descent starting 1 mile north of Totoltepec de Guerrero, Mexico, and ending with a landing on runway 23L at Benito Juárez International Airport in Mexico City.
The landing was executed with a total landing distance of 2,708 meters, which represented 79% of the available runway. The touchdown point was 302 meters beyond the touchdown zone, and the touchdown speed was slightly above the target speed. The runway touchdown position was slightly misaligned, but the runway rollout alignment was very good. The total flight distance was 2,431 nautical miles, and the flight duration was 345 minutes, with a fuel consumption of 17,384 kilograms.
The Boeing 737-900 touched down on runway 23L at MMMX Benito Juárez International Airport, with a threshold height of 59 feet above ground level, slightly above the target. The aircraft's speed at touchdown was 153 knots, a little faster than desired, but the touchdown rate of -173 feet per minute was satisfactory. The touchdown point was 302 meters beyond the designated touchdown zone, indicating a slight over-run.
The approach quality was good, with a heading of 239.0 degrees from the north east at 4 nautical miles and 1,267 feet above ground level. The threshold speed of 160 knots was well above the target, suggesting a high level of pilot control and situational awareness. The runway touchdown position was slightly misaligned by 6.0 meters from the centerline, but the runway rollout alignment was very good, indicating a high level of pilot skill and control during the critical phases of flight.
The total landing distance of 2,708 meters was 79% of the available runway length, indicating a safe and controlled landing. The local weather conditions, with a temperature of 21 degrees Celsius and a 10-knot headwind, contributed to a stable and predictable approach and landing. Overall, the landing performance was satisfactory, with a score of 92.8%, reflecting a high level of pilot skill and adherence to standard operating procedures.
Scroll or drag the slider to zoom · double-click to reset · hover for values