Events
Events
Events
Events
MY FS FLIGHTS
Flight Score
Departure
Start bringing the nose up as the speed reaches 65 kt, not after it.
What happened: You started the rotation at 85 kt, 20 kt past the 65 kt rotation speed.
Watch for: Airspeed indicator: 65 kt at rotation
See Departure Roll
Arrival
Reduce power earlier on final to bring threshold speed back to 84 kt.
What happened: You crossed the threshold at 90 kt against a target of 84 kt, and touchdown followed at 40 m, well short of the 352 m aim point. Carrying extra speed over the threshold usually floats the flare and carries the touchdown point short.
Watch for: Airspeed indicator, target 84 kt at the threshold.
Every knot above Vref is stored kinetic energy, and energy stored at the threshold must be dissipated in ground effect before the aeroplane will stop flying. Because kinetic energy scales with the square of speed, the excess you must dissipate grows fast. At a 45-knot approach, five knots hot is over a tenth more speed and roughly a quarter more energy to get rid of in ground effect. This is why the fix is never in the flare. It was decided three miles earlier, on final, at the airspeed indicator.
Read more in VRef ExplainedStart to finish · 16 stages, 13 in the score
Events
Events
Events
Events
Taxi out
The roll
Rotated late
Rotation started at 85 kt, 20 kt after the 65 kt rotate speed.
The pull started after the rotate speed had gone by. Bring the airspeed into the scan as it approaches the rotate speed, so the pull starts on the number rather than when you notice it has passed.
Liftoff and climb
Plan view the roll down the 598 m runway.
Rolled from the start of the runway, drifted right of the centreline, 3.4 m at the widest, and lifted off 2.9 m left. Airborne 31 % of the way down the runway, before the 75 % line.
The roll from above, with your left at the top. The line is where the wheels went, and "widest" is the furthest you drifted off the centreline. Lifting off before the amber 75 % line gets full marks for the roll length. The arrow beside the runway is the crosswind, pointing the way the air was moving, so it pushed the aircraft that way.
Side view from the start of the roll to 440 ft.
Reached 35 ft with 247 m of runway left; then climbing at 1,240 fpm on average to 440 ft.
The takeoff from the side: the height above the runway against the distance along it. The numbers along the runway are the speeds reached at each point. Lifting off in the amber last quarter of the runway costs marks for the roll length. The dark stretch of the roll is the run with the nose up and the wheels still on, with its length and time under the runway.
Speed and pitch from brake release to the end of the climb, against time.
Two traces from brake release: the airspeed on top, and below it the pitch, which is how far the nose is above the horizon. The dashed green line is the speed to rotate at for this aircraft at its weight, and the green dot is where the nose started to come up. The grey band is the run between the nose coming up and the wheels leaving the runway. The figure at liftoff is the pitch then. The grey dashed line across the pitch is the attitude held from 35 ft to the end: a nose held steady is a climb speed that holds, and the airspeed trace sits directly above it to compare.
Left-hand, 1,000 ft circuit height. The plan shows your circuit over a textbook one for this runway; the profile unrolls the same path from liftoff to the threshold.
Plan landing direction to the left; in pale blue the textbook circuit for your downwind speed, 1.4 nm out at 143 kt
The lap from above, with the landing direction to the left: the opposite of the runway drawings. The wide pale-blue line is a textbook circuit for your downwind speed - the downwind a mile out for every 100 kt, every turn at 30° of bank - and your track is drawn over it, each leg in the colour of its mark. The numbers are the four turns, the same as on the profile and the cards below. The 45° line from the threshold is the usual point to turn onto base.
Around the circuit height and bank; the turns are shaded
The same lap straightened out, so the height and the bank can be read together. Each shaded stretch is a turn, numbered as on the plan. The green box is circuit height, 1,000 ft, on the downwind. The amber line is 30° of bank, and a turn's steepest bank shows red above 32°. "Turn crosswind from" is the lowest height to start the first turn at.
Off heading: 11° from the leg's heading on average.
Each lap slightly wider and higher than the last, because you're unconsciously using the previous lap as your reference instead of the runway and the numbers. Invisible lap to lap, unmistakable across ten. This is the failure that only measurement catches, because your memory of lap three is gone by lap eight.
Read more in Pattern WorkHigh on downwind: 1,282 ft against 1,000 ft, 282 ft above.
Downwind. Parallel to the runway, opposite the landing direction, at pattern altitude and roughly 90 kt. The single most important moment of the entire circuit is the point abeam your intended touchdown point. Power back (around 1,700 RPM in a 172 works as a starting value to calibrate), first stage of flap, pre-landing flow, and re-trim. Everything from abeam to touchdown is one continuous energy problem. Arrive at the abeam point high or fast and you'll pay for it ninety seconds later in the flare, which is why analysing only the touchdown so often misdiagnoses the fault.
Read more in Pattern WorkGood: full marks on the turn and the leg after it.
Good: full marks on the turn.
The final from 4 nm.
Profile height against the 3° glideslope, with its 2° band in green.
Inside the glideslope band from 2.1 nm, where the final began, to the threshold, never more than 110 ft below the slope.
Your height above the runway against the distance still to go. The glideslope is the steady descent path to the aiming point, 305 m past the threshold: 3° here, which is about 320 ft for every nautical mile out, crossing the threshold at about 50 ft. The row under the distances is the height it puts you at. Inside the green band your path is drawn green; outside it, amber.
Plan distance off the extended centreline, your left at the top, with the 1° band. Sideways distances are drawn 3× larger than distances along the final.
Joined 446 m left of the centreline at 2.1 nm, then inside the band from 0.4 nm to the threshold.
Looking down from above, flying left to right towards the runway: up the page is left of the centreline, down is right. Sideways distances are stretched so that small drifts show, so a line that looks wild here may be only a few tens of feet. The labels are how far off you were at each distance, amber when outside the band.
Speed against the approach speed. The green band runs from 5 kt slow to 42 kt fast at the 1,000 ft gate, closing to 25 at 500 ft and 10 at the threshold.
Inside the speed band all the way, between −9 kt and +18 kt on the approach speed of 84 kt.
Your indicated airspeed down the final, against the approach speed for this aircraft at its landing weight. The band allows 5 kt slow and more on the fast side further out, closing as you get lower, because the speed is expected to come off on the way down. The figures are knots above (+) or below (−) the approach speed.
Over the threshold
The aircraft touched down before the threshold
Everything the flare is measured against - the profile, the crossing height, the aim point - is referenced to a threshold this landing never reached, so read the numbers below as what happened short of the runway, not on it. Landing short is the fault to fix before anything about the hold-off is worth judging.
Touchdown
Rollout
Side view — the last 598 m of the approach.
Began the flare at 24 ft, 261 m before the threshold; crossed the threshold at 60 ft, close to the 50 ft target; ballooned 3 ft from 4 ft. Touched down 40 m before the threshold.
The last stretch of the approach and the touchdown, from the side. The height is stretched so that the last few feet show: 80 ft top to bottom, against 598 m across. The dashed line is the ideal, 50 ft over the threshold and down 305 m in. The flare ring is where you began raising the nose, and "descent slowed" is where the sink came off; the figures beside them are the sink rate, pitch and speed at that point.
Plan view — the full 598 m runway, to the same scale as the side view.
Little crosswind (2 kt): nothing to correct for. Touched down with the nose 8° right of the track, 2.6° of bank.
Wind 262° at 17 kt · 17 kt head · 2 kt across
The runway from above, with your left at the top. Touching down inside the green bracket scores full marks for the distance. The shaded part is the rollout, up to where it ended. The arrow beside the runway is the crosswind, pointing the way the air was moving, so it pushed the aircraft that way. The wind is the one recorded at the landing, split along the runway (headwind or tailwind) and across it. To hold the centreline in a crosswind the nose points a little into wind - the crab - and is straightened with rudder just before the wheels touch, often with the into-wind wing lowered to stop the drift. The sentence gives the nose against the direction you were actually moving as the wheels touched, and the steepest bank as they touched, the figure the touchdown's Bank tile marks. The rest of it is shown for reading, not marked.
Touched down 40 m short of the threshold. The 308 fpm arrival was firm.
The stop — touchdown to taxi speed.
From 61 kt at touchdown to taxi speed (30 kt) in 11 s, an average deceleration of 0.15 g.
Your ground speed from the moment the wheels touched until you were down to taxi speed, against the distance rolled. A steep line is hard braking, a shallow one a long, gentle roll. For scale, an airliner's lowest autobrake setting decelerates at about 0.15 g, a medium one about 0.3 g. Shown for reading; not marked.
The rest of the report
The flight began with a departure roll from runway 25 at EDLB Borkenberge Airfield. The Bonanza G36 aircraft accelerated down the runway, covering a distance of 201 meters, which accounted for 43% of the runway's length. The liftoff speed was achieved at 90 knots.
As the aircraft took to the skies, it encountered local weather conditions with a temperature of 7°C and a wind speed of 15 knots at 263°. The crosswind component was minimal at 2 knots, while the headwind component was 15 knots. The pilot then entered a left-hand pattern from runway 25, completing the entry in less than 1 nautical mile in 54 seconds.
The aircraft continued to follow the left-hand pattern, with a crosswind leg that was completed in less than 1 nautical mile in 18 seconds. The pilot then initiated a downwind turn, covering a distance of 2 nautical miles at an angle of 52.0° to the runway. The downwind leg itself was 3 nautical miles long and took 67 seconds to complete.
As the aircraft approached the base leg, the pilot initiated a turn, covering a distance of 3 nautical miles at an angle of 45.1° to the runway. The base leg was 1 nautical mile long and took 35 seconds to complete. The final turn was initiated, covering a distance of less than 1 nautical mile in 32 seconds.
The aircraft then began its final approach to runway 25 from the east, heading 259.0° at 2 nautical miles and 640 feet above ground level. The touchdown was made before the threshold, with a speed of 76 knots, which was slightly faster than ideal. The touchdown rate was fair at -234 feet per minute. However, the runway touchdown position was slightly misaligned by 6.3 meters from the centerline.
The local weather conditions at touchdown were similar to those at departure, with a temperature of 6°C and a wind speed of 14 knots at 262°. The crosswind component was again minimal at 2 knots, while the headwind component was 14 knots. The total landing distance was 239 meters, accounting for 52% of the runway's length. The runway rollout alignment was very good.
The total flight distance was 10 nautical miles, taking 6 minutes to complete, and the aircraft used 4 kilograms of fuel during the flight.
Scroll or drag the slider to zoom · double-click to reset · hover for values