Events
Events
Events
Events
Events
Events
Events
Events
Events
Events
MY FS FLIGHTS
Flight Score
Work on the flare
Arrive slow and the sink rate at the threshold is already above schedule, the flare is short because there is no energy to extend it, and the touchdown is hard in a way that feels exactly like a late flare. Diagnosing a slow arrival as a late flare is the catastrophic misread: you respond by flaring earlier, which bleeds more speed, which makes the next one worse. The tiebreaker is threshold speed against VRef, not feel. Never diagnose a flare without it.
Read more in Flare TimingStart to finish · 20 stages, 19 scored
Events
Events
Events
Events
Events
Events
Events
Events
Events
Events
The threshold, the flare and the hold-off. The approach that led to it is the stabilisation gates below.
One stabilised approach gate: five checks where the approach path is 500 ft above the runway. The 1,000 ft gate was not assessed, because the approach did not join final that far out.
Side view — the last 5,368 ft of the approach.
Plan view — the first 5,368 ft of the 8,562 ft runway, to the same scale as the side view.
Touched down 2,962 ft past the threshold — beyond the full-score zone. The arrival was smooth.
The rest of the report
Overall, your approach phase had heading alignment and speed on target, but the descent path was above the glideslope limit. The landing phase had a high threshold height and a poor landing flare, while the touchdown phase had a good touchdown rate but a long distance and runway alignment was off.
To improve for future landings, I recommend focusing on maintaining a proper descent path and flare during the landing phase. Pay attention to your threshold height and ensure you are landing with the correct speed and alignment. Additionally, be cautious of tailwinds and ensure proper runway alignment during the rollout phase. Practice these elements during your training sessions to improve your overall landing performance. Keep up the good work and continue to refine your skills!
Scroll or drag the slider to zoom · double-click to reset · hover for values