Events
Events
Events
Events
Events
Events
Events
Events
Events
Events
Events
Events
MY FS FLIGHTS
Flight Score
Landing lights
Before entering the runway, make sure your landing lights are on and the taxi lights switched off.
Start to finish · 20 stages, 19 scored
Events
Events
Events
Events
Events
Events
Events
Events
Events
Events
Events
Events
The threshold, the flare and the hold-off. The approach that led to it is the stabilisation gates below.
One stabilised approach gate: five checks where the approach path is 500 ft above the runway. The 1,000 ft gate was not assessed, because the approach did not join final that far out.
Side view — the last 5,000 ft of the approach.
Plan view — the first 5,000 ft of the 6,791 ft runway, to the same scale as the side view.
The 976 ft touchdown sits inside the full-score zone. The arrival was smooth.
The rest of the report
Great job on achieving a landing score of 94.2%! Overall, your approach phase showed areas for improvement with a poor descent path below the glideslope limit and slightly above target speed. However, your landing phase demonstrated strong skills with a good threshold height and perfect landing flare.
During the touchdown phase, there were a few areas to focus on such as a very heavy touchdown rate and slightly above target speed. However, it's worth mentioning that your touchdown distance inside the touchdown zone and runway touchdown position were very good, showing great precision and control.
As you transitioned into the rollout phase, your runway alignment was very good, emphasizing your ability to maintain proper control and direction. Keep up the good work and continue to work on refining your approach and touchdown techniques to further improve your overall landing performance. With dedication and practice, you can strive for even higher scores in the future. Your talent and hard work are evident, and I have no doubt that you will continue to excel in your aircraft landing skills. Well done!
Scroll or drag the slider to zoom · double-click to reset · hover for values