Events
Events
Events
Events
Events
Events
MY FS FLIGHTS
Flight Score
Hold the approach angle
Preparing for a stable approach will give you time to decide on whether to attempt the landing or going around. Too much altitude with a high sink rate will result in carrying too much speed onto the runway. Configuring flaps and the gear late also won't help the speed decay.
Read more in The Stabilised ApproachStart to finish · 21 stages, 20 scored
Events
Events
Events
Events
Events
Events
Two stabilised approach gates, each with six checks at 1,000 ft and 500 ft above the runway.
The approach, gate by gate
Side view — the last 1,524 m of the approach.
Plan view — the first 1,524 m of the 3,196 m runway, to the same scale as the side view.
The 336 m touchdown sits inside the full-score zone. The arrival was smooth.
The rest of the report
Departing from Plovdiv International Airport, the Cessna 208B began its takeoff roll on runway 30, accelerating to a liftoff speed of 80 kt in 675 meters, which represented 27% of the runway's length. The aircraft then climbed away from the airport, reaching an altitude of 10,765 ft asl in 9 minutes, covering a distance of 23 nm. The climb was characterized by a steady increase in altitude, with the aircraft reaching a maximum rate of climb of 9,263 ft in the initial 9 minutes.
Following the initial climb, the aircraft entered a level cruise phase, which was interspersed with several descent phases. The first descent phase started 2 miles south west of Gorski Izvor Airstrip, where the aircraft descended from 10,915 ft asl to 7,621 ft asl in 3 minutes, covering 11 nm. The aircraft then entered a level cruise phase overhead Dimitrovgrad, lasting 24 minutes and covering 69 nm. This was followed by another descent phase, which started 3 miles north of Zagortsi Airport, where the aircraft descended from 6,991 ft asl to 3,034 ft asl in 3 minutes, covering 10 nm. The aircraft continued to cruise at various altitudes, with the final descent phase starting 5 miles south of Burgas, where the aircraft descended from 2,705 ft asl to 1,767 ft asl in 2 minutes, covering 4 nm.
The aircraft then began its final approach to runway 04 at Burgas Airport, descending from 1,271 ft agl to touch down on the runway at a speed of 61 kt. The touchdown distance was 336 meters, which represented 29% of the runway's length. The aircraft's touchdown rate was firm at -360 fpm, and the runway touchdown position was slightly misaligned by 6.1 meters from the centreline. Following a smooth rollout, the aircraft taxied to the parking area in 2 minutes, covering less than 1 nm. The total flight distance was 150 nm, and the aircraft used 204 kg of fuel during the flight, which lasted 60 minutes.
The Cessna 208B touched down on runway 04 at LBBG Burgas Airport, marking a satisfactory conclusion to the approach from the south west. The aircraft's descent was characterized by a slightly higher than target threshold height of 67 ft agl, but the threshold speed of 64 kt was well within acceptable limits. The subsequent touchdown was notable for its good speed of 61 kt and firm touchdown rate of -360 fpm, indicating a controlled and stable landing.
The aircraft's touchdown distance of 336 m was also within the desired range, and the runway touchdown position was only slightly misaligned by 6.1 m from the centreline. The local weather conditions, with a temperature of 15 °C and a negligible wind of 1 kt at 270 °, contributed to a relatively straightforward landing. The crosswind and tailwind components were both minimal at 1 kt, further reducing the complexity of the approach.
The aircraft's rollout was marked by excellent alignment with the runway centreline, demonstrating a high degree of control and precision. The total landing distance of 917 m, which accounted for just 29% of the runway length, was a testament to the pilot's skill and the aircraft's performance. Overall, the landing was scored 88.7%, reflecting a high level of proficiency and adherence to standard operating procedures.
Scroll or drag the slider to zoom · double-click to reset · hover for values