Events
Events
Events
Events
Events
Events
Events
Events
Events
Events
MY FS FLIGHTS
Flight Score
Improve the rollout
Ground control varies with speed, full authority at walking pace, progressively reducing as groundspeed rises. The aircraft becomes twitchy at any speed, every small pedal input swings the nose, which can encourage large-amplitude leg inputs that no real aircraft would accept.
Read more in How to Taxi AnywhereStart to finish · 23 stages, 21 scored
Events
Events
Events
Events
Events
Events
Events
Events
Events
Events
The threshold, the flare and the hold-off. The approach that led to it is the stabilisation gates below.
One stabilised approach gate: five checks where the approach path is 500 ft above the runway. The 1,000 ft gate was not assessed, because the approach did not join final that far out.
Side view — the last 1,734 m of the approach.
Plan view — the first 1,734 m of the 3,203 m runway, to the same scale as the side view.
Touched down 643 m past the threshold — beyond the full-score zone. The arrival was smooth.
The rest of the report
Great job on achieving a landing score of 96.3%! Your performance during the approach phase was excellent, with impeccable glideslope alignment. Additionally, the landing phase showcased a good threshold height and a well-executed landing flare.
During the touchdown phase, you managed to nail the touchdown rate perfectly, although the speed was slightly above target. It's great to see that the touchdown point was only 224 meters beyond the touchdown zone, indicating a precise landing. The runway touchdown position being 5.4 meters from the centerline is a minor deviation but still within acceptable limits.
As for the rollout phase, maintaining runway alignment within 6.2 meters of the centerline is commendable. Overall, your attention to detail and skillful execution throughout the landing process have resulted in an impressive score. Keep up the good work and continue striving for excellence in your future landings!
Scroll or drag the slider to zoom · double-click to reset · hover for values