Events
Events
Events
Events
Events
Events
Events
Events
MY FS FLIGHTS
Flight Score
Maintain the centreline
A small uncorrected heading error at 40 knots becomes a metre of offset per second by 100 knots, noticed only at rotation, producing a crabbed liftoff. Root cause is nearly always eyes on the tape instead of the far end of the runway. Small heading changes displace a distant point visibly long before the nearby centreline stripes look wrong.
Read more in Improve Your Take-OffsStart to finish · 19 stages, 18 scored
Events
Events
Events
Events
Events
Events
Events
Events
The threshold, the flare and the hold-off. The approach that led to it is the stabilisation gates below.
One stabilised approach gate: five checks where the approach path is 500 ft above the runway. The 1,000 ft gate was not assessed, because the approach did not join final that far out.
Side view — the last 1,524 m of the approach.
Plan view — the first 1,524 m of the 1,871 m runway, to the same scale as the side view.
The 360 m touchdown sits inside the full-score zone. The arrival was smooth.
The rest of the report
Overall, this aircraft landing had some strong points. The Approach Phase went very well with excellent glideslope and heading alignment, as well as on-target speed. The Touchdown Phase also had some positive aspects, such as a good touchdown rate and excellent runway alignment.
However, there were some areas for improvement. The Landing Phase had a poor landing flare, which could affect the smoothness of the touchdown. Additionally, the speed during the Touchdown Phase was slightly above target, which could lead to a harder landing.
To improve future landings, it is recommended to focus on honing the landing flare technique to ensure a smoother touchdown. Additionally, paying closer attention to speed control during the Touchdown Phase can help achieve a better landing. Overall, this landing was solid but there is room for improvement to make it even better in the future.
Scroll or drag the slider to zoom · double-click to reset · hover for values