Events
Events
Events
Events
Events
Events
Events
Events
MY FS FLIGHTS
Flight Score
Maintain the centreline
See Departure Roll
A small uncorrected heading error at 40 knots becomes a metre of offset per second by 100 knots, noticed only at rotation, producing a crabbed liftoff. Root cause is nearly always eyes on the tape instead of the far end of the runway. Small heading changes displace a distant point visibly long before the nearby centreline stripes look wrong.
Read more in Improve Your Take-OffsStart to finish · 15 stages, 14 in the score
Events
Events
Events
Events
Events
Events
Events
Events
From brake release to the end of the climb, against time, then the takeoff point by point.
Lifted off at 72 kt with 2.9° of pitch.
Two traces from brake release: the airspeed on top, and below it the pitch, which is how far the nose is above the horizon. The figure at liftoff is the pitch then.
The takeoff, point by point
Side view from the start of the roll to 582 ft.
Reached 35 ft with 7,101 ft of runway left; then climbing at 1,000 fpm on average to 582 ft.
The takeoff from the side: the height above the runway against the distance along it. The numbers along the runway are the speeds reached at each point. Lifting off in the amber last quarter of the runway costs marks for the roll length.
Plan view the roll down the 10,011 ft runway.
Rolled from 225 ft in, drifted 15 ft left of the centreline and was back on it to lift off. Airborne 20 % of the way down the runway, before the 75 % line.
The roll from above, with your left at the top. The line is where the wheels went, and "widest" is the furthest you drifted off the centreline. Lifting off before the amber 75 % line gets full marks for the roll length.
Left-hand, 1,000 ft circuit height. The plan shows your circuit over a textbook one for this runway; the profile unrolls the same path from liftoff to the threshold.
Plan landing direction to the left; in pale blue the textbook circuit for your downwind speed, 1.1 nm out at 106 kt
The lap from above, with the landing direction to the left: the opposite of the runway drawings. The wide pale-blue line is a textbook circuit for your downwind speed - the downwind a mile out for every 100 kt, every turn at 30° of bank - and your track is drawn over it, each leg in the colour of its mark. The numbers are the four turns, the same as on the profile and the cards below. The 45° line from the threshold is the usual point to turn onto base.
Around the circuit height and bank; the turns are shaded
The same lap straightened out, so the height and the bank can be read together. Each shaded stretch is a turn, numbered as on the plan. The green box is circuit height, 1,000 ft, on the downwind. The amber line is 30° of bank, and a turn's steepest bank shows red above 32°. "Turn crosswind from" is the lowest height to start the first turn at.
Speed: 84 kt on average lost marks on the entry.
The metric that matters across a circuit session is scatter, not score. Five landings at 180 to 220 fpm is better flying than one 90 fpm greaser sitting among four 400 fpm arrivals, because consistency is what professional flight-data monitoring actually looks for, and consistency only exists across many flights.
Read more in Pattern WorkHigh on downwind: 1,300 ft against 1,000 ft, 300 ft above.
Downwind. Parallel to the runway, opposite the landing direction, at pattern altitude and roughly 90 kt. The single most important moment of the entire circuit is the point abeam your intended touchdown point. Power back (around 1,700 RPM in a 172 works as a starting value to calibrate), first stage of flap, pre-landing flow, and re-trim. Everything from abeam to touchdown is one continuous energy problem. Arrive at the abeam point high or fast and you'll pay for it ninety seconds later in the flare, which is why analysing only the touchdown so often misdiagnoses the fault.
Read more in Pattern WorkLost marks: scored 70.
The final from 4 nm.
Profile height against the 3.1° glideslope, with its 2° band in green.
Inside the glideslope band from 1.7 nm, where the final began, to the threshold, never more than 80 ft above the slope.
Your height above the runway against the distance still to go. The glideslope is the steady descent path to the aiming point, 1,000 ft past the threshold: 3.1° here, which is about 330 ft for every nautical mile out, crossing the threshold at about 50 ft. The row under the distances is the height it puts you at. Inside the green band your path is drawn green; outside it, amber.
Plan distance off the extended centreline, your left at the top, with the 1° band. Sideways distances are drawn 3× larger than distances along the final.
Joined 1,350 ft left of the centreline at 1.7 nm, then inside the band from 1.2 nm to the threshold.
Looking down from above, flying left to right towards the runway: up the page is left of the centreline, down is right. Sideways distances are stretched so that small drifts show, so a line that looks wild here may be only a few tens of feet. The labels are how far off you were at each distance, amber when outside the band.
Over the threshold
Touchdown
Calm: nothing to correct for. Touched down straight, wings level.
The wind is the one recorded at the landing, split along the runway (headwind or tailwind) and across it. To hold the centreline in a crosswind the nose points a little into wind - the crab - and is straightened with rudder just before the wheels touch, often with the into-wind wing lowered to stop the drift. These are the nose against the direction you were actually moving, and the wings, at the moment of touchdown. Shown for reading; not marked.
Side view — the last 5,000 ft of the approach.
Crossed the threshold at 34 ft, 16 ft below the 50 ft target. Touched down 820 ft in, 180 ft short of the ideal 1,000 ft.
The last stretch of the approach and the touchdown, from the side. The height is stretched so that the last few feet show: 80 ft top to bottom, against 5,000 ft across. The dashed line is the ideal, 50 ft over the threshold and down 1,000 ft in. The flare ring is where you began raising the nose, and "descent slowed" is where the sink came off; the figures beside them are the sink rate, pitch and speed at that point.
Sink and pitch — through the flare, lined up with the side view.
The sink went from 490 fpm at 26 ft to 200 fpm at touchdown. The nose came up 4.8° on the way down.
Lined up with the side view above, so a point on one sits under the same point of the other. On top, how fast you were coming down: 0 is level, and −600 is 600 ft a minute down. Below, the pitch. In a flare the nose comes up and the descent slows towards 0. The figure at the touchdown line is your touchdown rate.
Plan view — the first 5,000 ft of the 10,011 ft runway, to the same scale as the side view.
Touched down 16 ft left of the centreline, and stayed about there down the rollout, 22 ft left at the widest.
The runway from above, with your left at the top. Touching down inside the green bracket scores full marks for the distance. The shaded part is the rollout, up to where it ended.
The 820 ft touchdown sits inside the full-score zone. The arrival was smooth.
The rest of the report
Scroll or drag the slider to zoom · double-click to reset · hover for values